Build errors when using Erika3
Posted: Wed Mar 07, 2018 5:26 pm
Hi,
My name is Junjie Shi, I am a PhD student from TU Dortmund.
Recently, I am using the new release of ERIKA V3 on windows 10-64 bit.
After installing all the needed software following the "quick start", I am unable to build the project, the error messages are shown as follows:
15:51:34 **** Incremental Build of configuration Default for project fachproject ****
make all
make[1]: Entering directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika'
ERIKA_FILES=/cygdrive/c/Users/JUNJIE~1/DOCUME~1/ARDUIN~1/ECLIPS~1/eclipse/plugins/COMEUE~1.201/ee_files
make[2]: Entering directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika/doc'
************************************************
* Erika Enterprise Documentation Generation... *
************************************************
**********************************************************
* Erika Enterprise Documentation Generated successfully! *
**********************************************************
make[2]: Leaving directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika/doc'
make[2]: Entering directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika'
***************************************
* Erika Enterprise Libraries build... *
***************************************
CC hooks.c
/bin/sh: C:\PROGRA~1\cygwin/bin/avr-gcc: No such file or directory
make[2]: *** [/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika/mk/ee_arch_rules.mk:201: obj/hardware/arduino/avr/cores/arduino/hooks.c.o] Error 127
make[2]: Leaving directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika'
make[1]: *** [makefile:77: all] Error 2
make[1]: Leaving directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika'
make: *** [makefile:92: /cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika/lib] Error 2
15:51:38 Build Finished (took 4s.467ms)
It may be caused by the path problem. Can anyone give me some suggestions? Thanks in advance!
My name is Junjie Shi, I am a PhD student from TU Dortmund.
Recently, I am using the new release of ERIKA V3 on windows 10-64 bit.
After installing all the needed software following the "quick start", I am unable to build the project, the error messages are shown as follows:
15:51:34 **** Incremental Build of configuration Default for project fachproject ****
make all
make[1]: Entering directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika'
ERIKA_FILES=/cygdrive/c/Users/JUNJIE~1/DOCUME~1/ARDUIN~1/ECLIPS~1/eclipse/plugins/COMEUE~1.201/ee_files
make[2]: Entering directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika/doc'
************************************************
* Erika Enterprise Documentation Generation... *
************************************************
**********************************************************
* Erika Enterprise Documentation Generated successfully! *
**********************************************************
make[2]: Leaving directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika/doc'
make[2]: Entering directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika'
***************************************
* Erika Enterprise Libraries build... *
***************************************
CC hooks.c
/bin/sh: C:\PROGRA~1\cygwin/bin/avr-gcc: No such file or directory
make[2]: *** [/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika/mk/ee_arch_rules.mk:201: obj/hardware/arduino/avr/cores/arduino/hooks.c.o] Error 127
make[2]: Leaving directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika'
make[1]: *** [makefile:77: all] Error 2
make[1]: Leaving directory '/cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika'
make: *** [makefile:92: /cygdrive/c/Users/JUNJIE~1/WORKSP~1/FACHPR~1/erika/lib] Error 2
15:51:38 Build Finished (took 4s.467ms)
It may be caused by the path problem. Can anyone give me some suggestions? Thanks in advance!